z/OS module messages - DTAX messages

Full message

ZDTP001S Persistent Storage allocation failed.

Explanation

The CICS PLT program was unable to allocate a required persistent storage area.

System action

The PLT program terminates and the CICS code module is not enabled.

User response

Determine why the CICS region is unable to provide storage for the DTAX transaction.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP002S Message Block allocation failed.

Explanation

The PLT program was unable to allocate a required Message block storage area.

System action

The PLT program terminates and the CICS code module is disabled.

User response

Determine why the CICS region is unable to provide storage for the PLT program.

Full message

ZDTP003S ZDTSOAPH Load failed.

Explanation

CICS could not load ZDTSOAPH.

System action

The PLT program terminates and the CICS code module is disabled.

User response

Determine why the CICS region is unable to provide storage for the DTAX transaction.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP004S ZDTDCCAL final block send failed. rc:<xx>.

Explanation

Message transfer from CICS code module to zDC has failed.

System action

CICS code module operation continues but with missing nodes in the distributed trace.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP005S START DTAX ICE failed.

Explanation

The EXEC CICS START command used to initiate the DTAX ICE transaction in 5 minutes interval has failed.

System action

None

User response

Examine the more detailed message in the appropriate CICS job log to look at the precise EIBRESP code that indicates why this EXEC CICS START command failed.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP006S Inquire MQCONN <QMGR Name> returned with resp:<xx> resp2:<xx>.

Explanation

EXEC CICS INQUIRE for MQ Connection information has failed.

System action

Missing MQ Queue manager name in CICS attachment details.

User response

With the help of resp and resp2 codes, determine why INQUIRE MQCONN failed.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP007S Enable of temporary Language Environment sensor failed no zDC.

Explanation

Indicates that the Language Environment sensor could not be enabled because zDC is unavailable.

System action

Language Environment sensor is not enabled. CICS code module doesn't monitor LE dynamic calls.

User response

Start the zDC for CICS code module to reconnect.

Full message

ZDTP008S GETMAIN PLT Workarea failed.

Explanation

Storage allocation for PLT work area failed.

System action

The PLT program terminates and the CICS code module is disabled.

User response

Determine why the CICS region is unable to provide storage for the PLT program.

Full message

ZDTP009S PLT Name/Token storage not found rc: <xx>.

Explanation

Persistent storage for PLT program is not found.

System action

The PLT program terminates and the CICS code module is disabled.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP010S Turn ON RMI Hook failed with rc: <xx>.

Explanation

RMI hook initialization failed.

System action

CICS code module not initialized successfully.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP011S Turn OFF RMI Hook failed with rc: <xx>.

Explanation

Disabling RMI hook failed.

System action

CICS code module not disabled successfully.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP012S GWA Storage unavailable.

Explanation

Global work area storage for PLT program is unavailable.

System action

Hooks don't initialize successfully.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP013S SOAP hook <nn> failed with rc: <xx>.

Explanation

SOAP hook enable/disable has failed.

System action

Hook operation fails.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP014S Language Environment sensor <nn> failed with rc: <xx>.

Explanation

Language Environment sensor enable/disable has failed.

System action

Hook operation fails.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP015S MRO hook <nn> failed with rc: <xx>.

Explanation

MRO hook enable/disable has failed.

System action

Hook operation fails.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP016S ZDTHKIDR failed with rc: <xx>.

Explanation

Hook operation has failed.

System action

CICS code module don't initialize successfully.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP017S zDC <zdcName> INIT Failed.

Explanation

The PLT program is unable to connect to the collection system.

System action

Execution continues. The PLT program tries to re-connect with the collection system during the next 5 minutes window.

User response

Check if the zRemote code module is up and running and connected to Dynatrace. If not, start the service that is down.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP018S CONF block allocation failed.

Explanation

Storage allocation for config block has failed.

System action

CICS code module doesn't initialize successfully.

User response

Determine why the CICS region is unable to provide storage for the DTAX transaction.

Full message

ZDTP019S Message buffer allocation failed.

Explanation

Storage allocation for message buffer has failed.

System action

CICS code module doesn't initialize successfully.

User response

Determine why the CICS region is unable to provide storage for the DTAX transaction.

Full message

ZDTP020S Get CICS Applid failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS ASSIGN for APPLID retrieval has failed.

System action

CICS Applid is not displayed in DTAX screen and in log messages.

User response

Determine the cause of the problem from resp and resp2 codes.

Full message

ZDTP021S Get STARTCODE failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS ASSIGN for program start code retrieval has failed.

System action

CICS code module doesn't initialize successfully.

User response

Determine the cause of the problem from resp and resp2 codes.

Full message

ZDTP022S CICS DELAY failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS DELAY has failed.

System action

None

User response

Determine the cause of the problem from resp and resp2 codes.

Full message

ZDTP023S Inquire DB2Entry failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS INQUIRE DB2ENTRY has failed.

System action

CICS code module operation continues.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP024S CICS code module could not locate a valid AgentId. Possibly a misconfigured or disconnected zRemote. Please check the zRemote log.

Explanation

CICS code module didn't get a valid AgentId after initialization.

System action

CICS code module is disabled.

User response

Check for error messages in zRemote log. If the zRemote service is not running, start it.

Full message

ZDTP025S Inquire System failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS INQUIRE SYSTEM for CICS version retrieval has failed.

System action

By default CICS code module for CICS Version 4.2 is loaded.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP026S Inquire Program failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS INQUIRE PROGRAM has failed.

System action

CICS code module operation continues.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP027S Disable Exit program failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS DISABLE PROGRAM for all exits has failed.

System action

CICS code module is not disabled successfully.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP028S Disable RMI Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS DISABLE PROGRAM for RMI exit has failed.

System action

RMI exit is not disabled successfully.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP029S START Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS ENABLE START for XPCREQC/XRMIIN/XRMIOUT exit has failed.

System action

Exits are not started successfully.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP030S FREEMAIN failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS FREEMAIN has failed.

System action

Global Work Area for PLT program FREEMAIN fails.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP031S Enable Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS ENABLE PROGRAM for enabling exits failed.

System action

CICS code module exits are not enabled successfully.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP032S STOP Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS DISABLE stop for exits failed.

System action

CICS code module exits are not stopped successfully.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP033S Cancel ReqID failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS CANCEL REQID has failed.

System action

DTAX ICE transaction is not cancelled.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP034S Inquire ReqID failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS INQUIRE REQID has failed.

System action

DTAX ICE transaction is not started successfully.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP035S GETMAIN failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS GETMAIN for Global Work Area has failed.

System action

Global Work Area for PLT program is not allocated. CICS code module doesn't initialize successfully.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP036S START DTAX ICE failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS START has failed.

System action

DTAX Interval control transaction is not started every 5 minutes.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP037S LOAD Agent failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS LOAD PROGRAM for ZDTAGTxx module has failed.

System action

ZDTAGTxx PTF and build date is not printed in the log messages.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP038S LOAD ZDTSOAPH failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS LOAD PROGRAM for ZDTSOAPH module has failed.

System action

ZDTSOAPH build date and version information are not printed in the log messages.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP039S Release code module failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS RELEASE PROGRAM for ZDTAGTxx/ZDTSOAPH module has failed.

System action

CICS code module operation continues.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP040S CICS Receive failed. resp:<xx>, resp2:<xx>.

Explanation

EXEC CICS RECEIVE DATA has failed.

System action

User command for DTAX transaction is not received and hence is not processed successfully.

User response

Determine the cause of the problem from resp and resp2 codes.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP041S zOS SMFid unavailable.

Explanation

Error retrieving zOS SMFid.

System action

CICS code module doesn't initialize.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP042S ZDTDCCAL INIT message send failed. rc: <xx>.

Explanation

CICS code module initialization has failed.

System action

CICS code module doesn't initialize.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP043S Unknown AUTHTYPE:<xx>.

Explanation

EXEC CICS INQUIRE DB2CONN retreives an AUTHTYPE that is not one of GROUP, TERM, TX, OPID, USERID.

System action

Authtype not specified in DB2 attachment data in distributed trace.

User response

Contact your Db2 administrator.

Full message

ZDTP044S ZDTDCCAL Register Connection pool failed. rc:<xx>.

Explanation

Sending Db2 connection pool information from CICS code module to zDC has failed.

System action

Db2 attachment details in distributed trace is empty.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP045S ZDTDCCAL Register DLI Connection pool failed. rc:<xx>.

Explanation

Sending DL1 connection pool information from CICS code module to zDC has failed.

System action

DLI attachment details in distributed trace is empty.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP046S ZDTDCCAL Message send failed. rc:<xx>.

Explanation

CICS code module could not send message to zDC.

System action

No data passes from CICS to zDC.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP047S DTAX Transaction definition not found. Disabling dynatrace agent.

Explanation

The RDO definition for DTAX transaction is not found.

System action

CICS code module not enabled and the PLT program execution terminates.

User response

Define DTAX transaction for the PLT program. Refer to CICRDO member in SZDTSAMP installation library for sample definition.

Full message

ZDTP048S Config block retrieval failed. rc:<xx>.

Explanation

CICS code module could not find the configuration data with sensor settings.

System action

CICS code module doesn't initialize.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP049S Config block not found.

Explanation

CICS code module could not find the config block with CICS sensor settings.

System action

CICS code module is disabled.

User response

Check if the CICS Transaction Server sensor is placed in the CICS code module Mapping.

Full message

ZDTP050S DTAX Enable failed. rc:<xx>.

Explanation

Couldn't enable CICS code module.

System action

CICS code module doesn't initialize successfully.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP051S ZDTAGT Copyright Info not found.

Explanation

Could not find the Copyright block in ZDTAGTxx module.

System action

CICS code module continues. No PTF/Build date is printed in the zRemote log.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP052S Check code module Mapping if the CICS Transaction Server sensor is placed.

Explanation

Configuration block with the CICS sensor information is not found.

System action

CICS code module is disabled.

User response

Check if the CICS transaction server sensor is placed in the CICS code module mapping.

Full message

ZDTP053S Disabling CICS code module.

Explanation

This message is an extention of ZDTP052S.

System action

CICS code module is disabled.

User response

Follow ZDTP052S.

Full message

ZDTP054S Turn ON Trace Hooks failed with rc: @@

Explanation

Couldn't enable Trace hook.

System action

Trace hook is not installed.

User response

Look in CICS log for problems. If you don't find anything, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP055S Turn OFF Trace Hooks failed with rc: @@

Explanation

Couldn't disable trace hook.

System action

Trace hook is not installed.

User response

Look in CICS log for problems. If you don't find anything, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP056S DSASTK address is not NULL -logic error

Explanation

Bad address for DSA storage

System action

Dynatrace hooks are not enabled.

User response

CICS getmain failed. Check CICS logs and correct problem.

Full message

ZDTP057S Getmain failed for DSA area

Explanation

Storage allocation for DSA area has failed.

System action

Dynatrace hooks are not enabled.

User response

Check CICS log and correct the problem.

Full message

ZDTP058S DSASTK address is Zero can not free GWA: @@

Explanation

Bad address for DSA storage free

System action

No attempt to free main storage.

User response

This is usually not a problem as Dynatrace code module usually just didn't get any storage for this configuration.

Full message

ZDTP059S Freemain failed for DSA area @@

Explanation

Bad address for DSA storage free from CICS chain.

System action

No attempt to free main storage.

User response

The storage chain is broken or corrupt.

If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

Full message

ZDTP060S Invalid ICE value, resetting to 5

Explanation

DTAX time value was not in the range from 1 to 5.

System action

The value is reset to 5.

User response

If you are changing ICE values in the DTAX transaction make sure it is value from 1 to 5.

Full message

ZDTP061S This upgrade requires a CICS restart

Explanation

CICS code module has been updated. A CICS restart is required to run the new code.

System action

None

User response

Restart CICS when you can to pick up new code module versions.

Full message

ZDTP062S No CICSplex name, CPSM API error <xx> occurred

Explanation

CICSPlex name not found for the CICS region due to an unexpected error indicated by the error code “xx”

System action

CICS code module continues initialization.

User response

None

Full message

ZDTP063S Turn OFF Language Environment sensor failed with rc: <xx>

Explanation

Couldn't disable Language Environment sensor.

System action

Language Environment sensor is not turned off, CICS code module continues to monitor LE events.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP064S Turn ON Language Environment sensor failed with rc: <xx>

Explanation

Couldn't enable Language Environment sensor.

System action

CICS code module doesn't monitor LE events.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP065S Disable EXITALL failed

Explanation

Couldn't disable the TRUE and GLUE exits after two consecutive attempts.

System action

CICS code module might cause an AKEA abend.

User response

Examine CICS log for DISABLE EXITALL failure.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP066S CICS version <Cics Version> unsupported. Disabling Dynatrace CICS code module.

Explanation

CICS code module has detected an unsupported version of CICS.

System action

CICS code module is disabled.

User response

Upgrade your CICS region to a version supported by Dynatrace.

Full message

ZDTP067S <ZDTAGTxx> Load failed. Disabling Dynatrace CICS code module.

Explanation

Loading of the CICS code module has failed.

System action

CICS code module is disabled.

User response

Examine the CICS job output for any other messages that may be relevant to the failure.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP068S Exec CICS Retrieve failed. resp:<xx>, resp2:<xx>, rcode:<xx>

Explanation

The EXEC CICS RETRIEVE command used to control the Language Environment sensor interval has failed.

System action

None

User response

Examine the more detailed message in the appropriate CICS job log to look at the precise EIBRESP code that indicates why this EXEC CICS RETRIEVE command failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP069S START LE ICE failed. resp:<xx>, resp2:<xx>, rcode:<xx>

Explanation

The EXEC CICS START command used to initiate the Language Environment sensor interval has failed.

System action

None

User response

Examine the more detailed message in the appropriate CICS job log to look at the precise EIBRESP code that indicates why this EXEC CICS START command failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP070S Agent program ZDTAGTnn not marked ThreadSafe - check CSD definition

Explanation

During CICS startup or DTAX command processing, the Agent program was not marked ThreadSafe. ThreadSafe is required for CICS performance.

System action

Processing is terminated and the CICS region is not setup to run Dynatrace.

User response

Check that the Dynatrace CICS resource definitions has been added to the CICS region. Sample resource definitions can be found in installation sample dataset member(CICRDO).

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP001W Please update PLT, INITPARM and RDO to ZDTPLT.

Explanation

RDO definition for ZDTPLT with suffix (67/68/69/70/71/72/73) found.

System action

Execution continues.

User response

Update the RDO definitions for ZDTPLTxx and DTAX to refer to ZDTPLT without suffix. Refer to CICRDO member in SZDTSAMP installation library for sample RDO definitions.

Full message

ZDTP002W Extract Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

There was a problem in retrieving the Global Work Area storage for exit program. EXEC CICS EXTRACT EXIT operation failed. This is also possible when an attempt was made to look up DTAX CONF when the CICS code module is disabled.

System action

None

User response

Determine the cause of the problem from resp and resp2 codes.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP003W zDC <name> and GWA unavailable.

Explanation

Exits are enabled but there was a problem in retrieving the Global work area because there was no zDC available.

System action

None

User response

Check if the zDC is up and connected to zRA.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP004W zDC <zDC Name> unavailable.

Explanation

There was no zDC available for CICS code module to connect to.

System action

CICS code module is disabled.

User response

Start zDC and check if the zDC connects successfully to zRA.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP005W Config block retrieval failed. Attempt re-retrieval during ICE.

Explanation

CICS code module could not retrieve CICS Sensor configuration block.

System action

DTAX transaction attempts to retrieve CICS Sensor configuration block in the next 5 minutes interval.

User response

Check if the CICS code module is successfully enabled in the next 5 minutes interval.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP006W DTAX ICE is out of range 1 - 5 minutes. Forcing ICE to 5 minutes.

Explanation

DTAX ICE command was issued with an invalid value.

System action

DTAX transaction sets the ICE value to the default 5 minutes.

User response

If you want to change the default DTAX ICE value, enter a value between 1 to 5.

Full message

ZDTP007W No CICSplex name, CPSM API not available.

Explanation

No CICSplex name is available for the CICS region.

System action

CICS code module continues initialization.

User response

None

Full message

ZDTP008W Too many configuration parameters to display.

Explanation

DTAX CONF option couldn't display all the configuration settings in the DTAX panel, because there's not enough screen area for the display.

System action

Configuration settings are truncated in the DTAX display

User response

None

Full message

ZDTP009W Refer to Deep monitoring section in the UI for all the parameters.

Explanation

Check all CICS code module configuration parameters in Dynatrace UI.

System action

None

User response

To view all the CICS code module configuration settings, go to Settings > Server-side service monitoring > Deep monitoring > CICS, IMS and MQ monitoring.

Full message

ZDTP010W Temporary Language Environment sensor enable failed

Explanation

Couldn't enable Language Environment sensor.

System action

CICS code module doesn't monitor Language Environment events.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP011W Temporary Language Environment sensor disable failed

Explanation

Couldn't disable Language Environment sensor.

System action

CICS code module continues to monitor Language Environment events which might cause overhead.

User response

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP013W PLT version <plt version> and CICS Agent version <zdtagt version> does not match

Explanation

Dynatrace CICS code module versions are different.

System action

None

User response

Perform CEMT SET NEWCOPY for the version that is older. For example:

If PLT is older

CEMT SET PROG(ZDTPLT) NEWCOPY

If CICS code module version is older (zz is the CTS version)

CEMT SET PROG(ZDTAGTzz) NEWCOPY

Full message

ZDTP014W Invalid time interval entered for Language Environment sensor.

Explanation

Invalid minute value entered for the Language Environment sensor.

System action

None

User response

Enter a valid interval, between 1-1000 minutes, to enable the Language Environment sensor.

Full message

ZDTP015W Language Environment sensor time interval out of range (1-1000).

Explanation

The Language Environment sensor interval value entered is out of range.

System action

None

User response

Enter a valid interval value between 1-1000 minutes to enable the Language Environment sensor.

Full message

ZDTP001I DTAX User Command: PING.

Explanation

User issued a DTAX PING command.

System action

Check if the connection exists between the z/OS CICS code module and the zRemote code module.

User response

None

Full message

ZDTP002I DTAX User Command: DISABLE.

Explanation

User issued a DTAX DISABLE command.

System action

Disable all the exits used by CICS code module and terminate the 5 minutes DTAX cycle.

User response

None

Full message

ZDTP004I DTAX User Command: CONF.

Explanation

User issued a DTAX CONF command.

System action

Display the active CICS Sensor configuration in the DTAX panel.

User response

None

Full message

ZDTP005I DTAX User Command: ENABLE.

Explanation

User issued a DTAX ENABLE command.

System action

CICS code module registers with the collection system. On successful connection, respective EXITs and Hooks are enabled.

User response

None

Full message

ZDTP006I ZDTPLT[CPLT] Compiled on mm dd yyyy hh:mm:ss.

Explanation

This message is displayed in zRemote log file when the CICS code module connects during CICS startup. This message gives ZDTPLT compilation and version information.

System action

None

User response

None

Full message

ZDTP007I ZDTAGT <PTF> <Build Date> <Build Time> VER <Product Release> <CICS Version>.

Explanation

This message is logged in zRemote log file when the CICS code module connects during CICS startup. This message gives CICS code module module (ZDTAGT) compilation and version information.

System action

None

User response

None

Full message

ZDTP008I ZDTSOAPH <PTF> <Build Date> <Build Time> VER <Product Release>.

Explanation

This message is logged in zRemote log file when the CICS code module connects during CICS startup. This message gives ZDTSOAPH compilation and version information.

System action

None

User response

None

Full message

ZDTP009I INIT failed during PLT. Trying to reconnect…

Explanation

The PLT program is unable to establish connection with the zRemote code module during PLT time.

System action

Reconnect attempted during the next DTAX cycle, which starts immediately after the CICS region comes up.

User response

None

Full message

ZDTP010I Screen size unavailable.

Explanation

There was a problem in retrieving the screen attributes.

System action

Screen attributes are defaulted to Screen Width=80 and Screen Height=24.

User response

None

Full message

ZDTP011I DISABLE TRUE(ZDTAGTxx) with ENTRYNAME(ZDTAGENT).

Explanation

The exit program ZDTAGTxx associated with entryname ZDTAGENT is disabled. xx represents the CTS version.

System action

None

User response

None

Full message

ZDTP012I ENABLE TRUE(ZDTAGTxx) with ENTRYNAME(ZDTAGENT).

Explanation

The exit program ZDTAGTxx associated with entryname ZDTAGENT is enabled. xx represents the CTS version.

System action

None

User response

None

Full message

ZDTP013I ENABLE Exit program(ZDTAGTxx) with Exit([exit name]).

Explanation

Enable the global exit point specified by [exit name] associated with the ZDTAGTxx exit.

System action

None

User response

None

Full message

ZDTP014I START TRUE(ZDTAGTxx) with ENTRYNAME(ZDTAGENT).

Explanation

Start the user exit ZDTAGENT associated with the exit program ZDTAGTxx.

System action

None

User response

None

Full message

ZDTP015I START Exit program(ZDTAGTxx) with Exit([exit name]).

Explanation

Start the global exit point specified by [exit name] associated with the exit program ZDTAGTxx.

System action

None

User response

None

Full message

Explanation

Stop and disable all the exit points associated with the exit ZDTAGTxx.

System action

None

User response

None

Full message

ZDTP017I DISABLE Exit program(ZDTAGTxx) with Exit([exit name]).

Explanation

Disable the global exit point [exit name] associated with the exit ZDTAGTxx.

System action

None

User response

None

Full message

Explanation

Indicates that CICS sensor configuration has been retrieved successfully after there was a problem in configuration block access. This message follows after ZDTP049S when the CICS transaction server sensor has been placed.

System action

CICS code module is initialized.

User response

None

Full message

ZDTP020I Active Sensors: <TX | MQ | DB2 | DB2R | SOAP | CTG | DB2Fetch | DLI | DLIR | LE>.

Explanation

Indicates the CICS Sensors that are placed and active.

System action

None

User response

None

Full message

ZDTP021I CICS Sensors updated.

Explanation

Indicates that the CICS Sensors have been updated and the CICS code module honored the changes during DTAX 5 minutes cycle.

System action

None

User response

None

Full message

ZDTP022I Inquire DB2Conn failed. resp:<xx>, resp2:<xx>, rcode:<xx>.

Explanation

EXEC CICS INQUIRE DB2CONN has failed.

System action

CICS code module operation continues. No DB2 attachment details provided in the distributed trace.

User response

Determine the cause of the problem from resp and resp2 codes.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP023I DTAX ICE interval set to: @@ minute(s).

Explanation

DTAX ICE value was changed.

System action

None, this is informational message.

User response

None

Full message

ZDTP024I Trace Hook is being enabled

Explanation

Indicates that the Trace hook is being turned on in the CICS code module.

System action

None, this is informational message.

User response

None

Full message

ZDTP025I Trace Hook is being disabled

Explanation

Indicates that the Trace hook is being turned off in the CICS code module.

System action

None, this is informational message.

User response

None

Full message

ZDTP026I Temporary Language Environment sensor is enabled for @@@@ minute(s).

Explanation

Indicates that the Language Environment sensor has been turned on for the current DTAX ICE interval. Note that the Language Environment sensor will be automatically turned off during the following DTAX ICE cycle.

System action

None, this is informational message.

User response

None

Full message

ZDTP027I Turn off Language Environment sensor because ICE timer expired

Explanation

Indicates that the Language Environment sensor has been automatically turned off at the end of the current ICE interval.

System action

None, this is informational message.

User response

None

Full message

ZDTP028I TX code : xxxx xxxx xxxx .

Explanation

Displays the Start TX sensor setting in Deep Monitoring in the web UI for the CICS regions.

System action

None, this is informational message.

User response

None

Full message

ZDTP029I DTAX User Command: LEENAB

Explanation

User issued a DTAX LEENAB command to turn on the Language Environment sensor.

System action

Language Environment sensor is turned on temporarily. CICS code module starts monitoring LE dynamic calls.

User response

None

Full message

ZDTP030I DTAX Status:V.R PLT-PTF AGT-PTF TRUE-STS XP RMI-STS ZDC-NAME AGT-ID ).

Explanation

DTAX STATUS console command was issued. This can be used for Automated Operations to see if Dynatrace Hooks/Exits are enabled. Field descriptions:

System action

None, this is informational only.

User response

None

Full message

ZDTP031I DSA Freed at location : <addr>

Explanation

Indicates that the DSA at location addr, used by CICS code module, has been freed.

System action

DSA memory is freed.

User response

None

Full message

ZDTP131I Install of Soap Hook Completed Return Code: xxxx

Explanation

CICS code module has completed installing SOAP hook for SOAP request monitoring. Return code 0 indicates successful SOAP hook installation.

System action

CICS code module is ready to monitor SOAP events with successful SOAP hook installation.

User response

If the Return code is a non-zero value, SOAP hook installation has failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP132I Removal of SOAP Hook Completed Return Code: xxxx

Explanation

CICS code module has completed removing SOAP hook. Return code 0 indicates successful SOAP hook removal.

System action

CICS code module stops monitoring SOAP events if the SOAP hook has been removed successfully.

User response

If the Return code is a non-zero value, SOAP hook removal has failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP133I Install of MRO Hook Completed Return Code: xxxx

Explanation

CICS code module has completed installing MRO hook for multi region call monitoring. Return code 0 indicates successful MRO hook installation.

System action

CICS code module is ready to monitor MRO events with the successful MRO hook installation.

User response

If the Return code is a non-zero value, MRO hook installation has failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP134I Removal of MRO Hook Completed Return Code: xxxx

Explanation

CICS code module has completed removing MRO hook. Return code 0 indicates successful MRO hook removal.

System action

CICS code module stops monitoring MRO events if the MRO hook has been removed successfully.

User response

If the Return code is a non-zero value, MRO hook removal has failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP135I Install of ERM Hook Completed Return Code: xxxx

Explanation

CICS code module has completed installing ERM hook for DB2 call monitoring. Return code 0 indicates successful ERM hook installation.

System action

CICS code module is ready to monitor DB2 calls from the CICS region with the successful ERM hook installation.

User response

If the Return code is a non-zero value, ERM hook installation has failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP136I Removal of ERM Hook Completed Return Code: xxxx

Explanation

CICS code module has completed removing ERM hook. Return code 0 indicates successful ERM hook removal.

System action

CICS code module stops monitoring DB2 calls if the ERM hook has been removed successfully.

User response

If the Return code is a non-zero value, ERM hook removal has failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP137I Install of PL1 Hook Completed Return Code: xxxx

Explanation

CICS code module has completed installing PL1 hook for monitoring PL1 dynamic calls. Return code 0 indicates successful PL1 hook installation.

System action

CICS code module is ready to monitor PL1 dynamic calls with the successful PL1 hook installation.

User response

If the Return code is a non-zero value, PL1 hook installation has failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP138I Removal of PL1 Hook Completed Return Code: xxxx

Explanation

CICS code module has completed removing PL1 hook. Return code 0 indicates successful PL1 hook removal.

System action

CICS code module stops monitoring PL1 dynamic calls if the PL1 hook has been removed successfully.

User response

If the Return code is a non-zero value, PL1 hook removal has failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP139I Install of <COBOL routine> Hook Completed Return Code: xxxx

Explanation

CICS code module has completed installing COBOL hooks IGZCFCC, IGZCLNK and IGZXFCAL (indicated by “COBOL routine”) for monitoring COBOL dynamic calls. Return code 0 indicates successful COBOL hooks installation.

System action

CICS code module is ready to monitor COBOL dynamic calls with the successful COBOL hooks installation.

User response

If the Return code is a non-zero value, COBOL hook installation has failed.

Please contact a Dynatrace product expert via live chat within your environment.

Full message

ZDTP140I Removal of COBOL Hook Completed Return Code: xxxx

Explanation

CICS code module has completed removing COBOL hook. Return code 0 indicates successful COBOL hook removal.

System action

CICS code module stops monitoring COBOL dynamic calls if the COBOL hook has been removed successfully.

User response

If the Return code is a non-zero value, COBOL hook removal has failed.

Please contact a Dynatrace product expert via live chat within your environment.