Cluster node ports
Dynatrace Managed requires configuration of network ports to operate, to serve pages, and to accept monitoring data.
Be sure to configure your network and firewall so that all ports listed below are accessible. Note that ports should be opened for bi-directional communication. For a typical deployment, we recommend that all ports be open between the cluster nodes.
Port 443
must remain open to allow incoming traffic from your data center.
Port | Used by | Notes |
---|---|---|
| Dynatrace Managed UI, OneAgent and REST API | Routed to local port |
| Monitoring data from OneAgent, nodes within Dynatrace Managed cluster | OneAgent only sends data outbound to Dynatrace Server—it doesn't open a listening port. Each monitored machine with OneAgent installed on it must access this port. This port must remain open for communication between nodes within Dynatrace Managed deployments. |
| Upgrade UI | This port can be closed to traffic coming from outside the Dynatrace cluster. If you're running a Dynatrace Managed cluster, only your cluster nodes need access to this port. |
| Dynatrace Managed UI and REST API | These ports can be closed to traffic coming from outside the Dynatrace cluster. If you're running a Dynatrace Managed cluster, only your cluster nodes need access to these ports. |
| Dynatrace Managed UI and REST API (NGINX) | Port 8022 can be closed to traffic coming from outside the Dynatrace cluster. This port can be used as an equivalent to 443 if usage of a non-privileged port is required. |
| Hazelcast In-memory data grid platform | Responsible for data being evenly distributed among the cluster nodes. Allows for horizontal scaling of processing and storage. These ports can be closed to traffic coming from outside the Dynatrace cluster. If you're running a Dynatrace Managed cluster, only your cluster nodes need access to these ports. |
| Cassandra-based Hypercube storage | These ports can be closed to traffic coming from outside the Dynatrace cluster. If you're running a Dynatrace Managed cluster, only your cluster nodes need access to these ports. |
| Elasticsearch-based search engine | These ports can be closed to traffic coming from outside the Dynatrace cluster. If you're running a Dynatrace Managed cluster, only your cluster nodes need access to these ports. |
Dynatrace environments with a cluster version earlier than 1.166 use port 8443
. New Dynatrace environments still use port 8443
, but this port doesn't need to be exposed to the outside of the cluster nodes. Upgraded Dynatrace environments preserve port settings from the previous version. As a result, it is possible to have an upgraded Dynatrace environment that still uses port 8443
.
Outbound communication to Dynatrace Mission Control
All nodes in the cluster should be able to communicate with Mission Control to receive software updates and facilitate a data exchange using following addresses:
52.5.224.56
,
52.200.165.10
,
13.228.109.33
,
52.221.165.63
,
46.137.81.205
,
52.48.91.146
Domains used: mcsvc.dynatrace.com
, mcsvc-us.dynatrace.com
, mcsvc-eu.dynatrace.com
, mcsvc-ap.dynatrace.com
.
All cluster data received by Mission Control via the endpoints above is hosted in the U.S. regions.
In order to ensure compliance with U.S. restrictions2, in the event that you now or at any time in the future plan to host a Dynatrace Managed cluster or monitor any technology with Huawei Cloud services (or any hosting service provided by an affiliate of Huawei Technologies), then you should contact a Dynatrace ONE product specialist to set a proper endpoint - Europe or Asia / Pacific.
Network communication is used for license validation, health monitoring, automatic updates, and remote access. The communication is established via HTTPS and WSS through port 443
and based on TLS v1.2. The TLS/SSL certificate is provided by Amazon and is automatically renewed annually.
Communication between Dynatrace Managed clusters and Mission Control can also be routed via a proxy, but the proxy must allow web sockets and support the SNI TLS extension and WebSockets.
The Dynatrace Software may not be exported or re-exported from the U.S. to (a) any Group E country listed in SUPPLEMENT NO. 1 TO PART 740 – COUNTRY GROUPS (Currently Syria, North Korea, Iran and Cuba) or the Crimea Region of Ukraine, or (b) any company, entity or person listed as a party of concern found here (currently including Huawei Technologies and its affiliates worldwide), or (3) for any end-use related to the development, production or use of nuclear, chemical or biological weapons or missiles. Our contracts with our customers require compliance with these and other export control laws.