Dashboard list view

The Dashboard List view provides a summary of your measurements with aggregated response time and availability data for the last 5 minutes, 15 minutes, 1 hour, and 24 hours. Up to 350 measurements can be included in the Dashboard List view.

Dashboard list view

Create short alias for dashboard list view

Administrators can create a special short alias for use on this dashboard. See this help page for more information.

Expand measurement view

For measurements with multiple actions, click the plus (+) icon next to the measurement to display underlying actions. If the measurement uses Web Content Trending you can further expand each action view to view page elements grouped by domain.

Open actions
Open actions

Note

Color coding for warning and critical thresholds does not apply to page detail views.

Cell colors and thresholds

The Dashboard List view makes use of critical and warning Alarm thresholds, if set, to enable the status of each measurement to be indicated by color. You can also set thresholds globally, without configuring alarms:

  • Green for measurements that have not passed the warning threshold, or for which no alarm thresholds have been set

  • Yellow for those measurements that have passed the warning threshold but not the critical threshold

  • Red for those that have passed the critical threshold

Response times
Response times

If desired, you can select Critical only to display only those measurements in the List view that are worse than Critical thresholds.

Note

A cell color of red or yellow does not necessarily indicate that the measurement is currently triggering an alert, only that the value shown in the cell meets the thresholds. There may be no alert triggered because alarm thresholds can be based on a different look-back period, or on dynamic values and may not be in an alert condition currently despite the color code.

Setting thresholds

Cell colors can be based on alarm thresholds or global settings. For information, see this help page.

Last one hour alerts

Dashboard views also include a list of all warning and critical alerts that have been triggered in the last hour.

Last one hour alerts
Last one hour alerts

The metric shown in this area indicates the type of alarm and the measurement value that triggered it.

Customizing the dashboard

Several aspects of the Dashboard List view may be customized. Click the Customize link at the top right of the dashboard to begin.

Customize dashboard
Customize dashboard
  • Use Label layout in list view —Enables the Dashboard List view to organize measurements by label. Labels are groups of measurements that administrators can set up. Review more information about Labels.
  • Select Labels —If Labels are enabled for the Dashboard List view, you can select the ones you want to be displayed. Only measurements matching the selected Labels will be displayed.
  • Automatically move measurements to top of list when alert is received —If selected, measurements for which alerts have been triggered are moved to the top of the display.
  • Number of rows to be viewed in the List View —Specifies how many rows to display. Choose between 20, 40, 60, 80, and 100 rows.

Drill down

Clicking a measurement value in a Dashboard view displays a scatter plot showing measurements for approximately the last hour from all agents. You can expand the time frame covered up to the last 24 hours from this scatter plot using the slider below the graph.

Dashboard drill down
Dashboard drill down

By default, the last one hour of measurements is shown. Use the slider control at the bottom of the scatter plot to change the time frame that is displayed. The left and right handles of the control can be dragged to change the length of the time span. Clicking the middle of the control and dragging changes the range that is displayed.

Hover over a data point to see measurement details. You can drill down further when you click a data point.