To verify that you are connected to your mobile application and can send data to the AppMon Server, enable logging and set the log level to ALL.
serverURL from the
startupWithApplicationName call is correct and the Server is responding, a log message similar to this displays:
server response: type=m&cp=1&si=120&cl=1&cr=1&er=1&bn=dynaTraceMonitor&id=1&bl=30&st=600
However, if the
serverURL is not correct or the Server is not functioning properly, a log message similar to this displays:
Error sending data to dynaTrace - comm in progress switch: 1
You can recompile your application with a new iOS Mobile Agent release. It combines the Auto-Instrumentation with any manual instrumentation present in the application. Use the instrumentation settings keys to control the level of Auto-Instrumentation.